Close MenuOpen Menu
£0.00 (0)

M4 grip spacers

These M4 grip spacers can be used to achieve the correct fitment of the pistol grip without the need to file the grip down.

The spacers are 1.0mm 1.5mm and 2.0mm so you can make any size from 1.0mm to 4.5mm (far more than would be needed) in 0.5mm increments. There are also 2 longer grip screws in the pack, use the longest screws that do not go too far into the gearbox or you could damage your aeg’s wiring.

To get the perfect fit put one large spacer in the grip and fit it to the gearbox and measure the gap between the lower receiver and the grip. For example if you fit the 2.0mm spacer and measure/estimate there is a 0.5mm gap then the 1.5mm spacer will be perfect.

Empty Sidebar
You haven't added any widgets to your sidebar. You can add widgets by going to: Appearance > Customize > Widgets

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss